Amazone AMASPRAY+ - Putting the Machine into Operation; Calibrating Distance Measurement (Impulses;100 m)

Putting into operation
18
AMASPRAY+ BAG0017.7 10.17
5.2 Determination of impulses per 100m
• The AMASPRAY
+
requi
res the calibration value "Impulses
per 100m" to determine the
• actual forward speed [k.p.h].
• actually worked area.
• If the calibration value is accurately known you can manually
enter the calibration value "Impulses per 100m" into the
AMASPRAY
+
.
• If the calibration value is not known the calibration value "Im-
pulses per 100m" has to be determined via a calibration run.
• As a matter of principle determine the accurate calibration
value "Impulses per 100m" via a calibration run:
• before the first operation.
•
when using another tractor or after changing the tractor
tyre size.
• in case of deviations between the determined and the a
c-
tual forward speed / travelled distance.
• in case of deviations between the determined and the a
c-
tually worked area.
• when different soil conditions prevail.
• Determine the calibration value "Impulses per 100m" in rela-
tion to the prevailing operational conditions in the field. When
the spraying operation is carried out with the all wheel drive
actuated, switch over to the calibration value determined for
the all wheel drive.