Maintenance, repair and care
BAG0017.7 10.17
Enter the value for the tank contents and not for the added
amount of water.
7. Confirm the input with key .
→ Indication check point 3.
8. Proceed until all 20 check points have been registered.
9. Press key
to leave the menu.
In case the tank is nearly empty or nearly full select smaller
check point spacings than at a medium fill level.
The learned measuring points can be
Displayed for documentary reasons (see Seite 36),
Manually entered after the exchange or reset of
AMASPRAY
+
(see Seite 36).
Values for tank contents for measuring points of the learnable fill level curve
[Litre]
[Litre]
[Litre]
Table 1
To Next Page
Loading...
