Amazone AmaSpread+ - 5 Operating data; Saving and Managing Operating Data; Recorded Operating Data; Spread Rate and Calibration Adjustment

Operating data
AmaSpread+
BAG0126.4 09.17
19
5 Operating data
• The operating data can be saved under any name and then be
called up again.
• The operating data can be managed.
5.1 Operating data menu
The following operating data are recorded:
• Worked area
• Working time
• Spread quantity
- Total data / - daily data
The operating data overview can be saved under a given name and
be called up again.
The spread rate can also be changed here.
The calibration value can also be changed here.
Changed values overwrite the active settings
Given name:
Name
Entered note:
Note
Spread rate:
200 kg / ha
Calibration factor:
1.00
Worked area:
0.00 ha 0.00 ha
Working time:
0h 00 min 0h 00 min
Spread quantity:
0 kg 0 kg