AmaSpread+ BAG0126.4 09.17
10.1 Configuring the scale
• Scale on / off
• Calibrate scale
• Adjust scale
• Scale parameter 1
2
Page 2:
• Scale parameter 2
Calibrate scale
The calibration comprises:
• The taring of the empty fertiliser spreader at a content of 0 kg.
• The adjustment of the filled hopper to the filled fertiliser quantity.
1. The fertliiser spreader must be completely
emptied (see Machine Data menu).
Fertiliser spreader is not empty:
→ Abort configuration.
→ Empty the fertiliser spreader, see Extended
settings.
Fertiliser spreader is empty:
2. Park the tractor and the attached fertiliser
spreader on a level surface and wait until it
has come to a complete rest.
3. Parameter 1 will be set.
4. Fill at least 500 kg of fertiliser into the hop-
per.
5. Park the tractor and the attached
spreader on a horizontal surface and wait
until it has come to a complete rest.
6. Confirm.
7. Enter the precise quantity of fertiliser just
added.
0000 kg
To Next Page
Loading...
