Amazone FTender 1600 - Page 5

10.1.9 Cleaning the hand wash tank 113
10.1.10 Checking the tightening torque for
the radar sensor bolts 113
10.1.11 Checking the wheel bolt tightening
torque 114
10.1.12 Checking the frame connection
tightening torque 114
10.1.13 Checking the tyre inflation pressure 115
10.1.14 Adjusting the scraper on the T-Pack F115
10.1.15 Checking the roller chain 116
10.1.16 Tensioning the roller chain 117
10.2 Lubricating the machine 119
10.2.1 Overview of lubrication points 120
10.2.2 Lubricating the roller chain on the
filling auger 121
10.3 Cleaning the implement 123
11 Preparing the implement for
transport 124
11.1 Loading the implement with a
crane 124
11.2 Manoeuvring the implement onto
a transport vehicle 124
11.3 Lashing the implement 125
12
Disposing of the implement 126
13 Appendix 127
13.1 Bolt tightening torques 127
13.2 Other applicable documents 128
14
Directories 129
14.1 Glossary 129
14.2 Index 130
TABLE OF CONTENTS
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
III