To Next PageTo Next PageHow to fix Ambient Weather Station wireless remote not reporting to console?
If any of the sensor communication is lost, press and hold the CHANNEL/+ button for 3 seconds, and the remote search icon will be constantly displayed.
Why indoor and outdoor temperature do not agree on my Ambient Weather Station?
Allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor temperature sensors should agree within 2 °F (the sensor accuracy is ± 1 °F). You can also use the calibration feature to match the indoor and outdoor temperature to a known source.
Why indoor and outdoor humidity do not agree on my Ambient Weather Station?
Allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor humidity sensors should agree within 10 % (the sensor accuracy is ± 5 %). You can use the calibration feature to match the indoor and outdoor humidity to a known source.
What to do if Ambient Weather Station temperature sensor reads too high?
Ensure the thermo-hygrometer is mounted in a shaded area, ideally on a north-facing wall. If that's not possible, consider using a radiation shield.
What to do if the Ambient Weather Station display console contrast is weak?
If the display console contrast is weak, replace the console batteries with a fresh set of batteries.
Why outdoor color does not change as expected on my Ambient Weather Station?
Make sure the outdoor sensor is assigned to Channel 1.
General| Display Type | LCD |
|---|---|
| Power (Remote Sensor) | 2 x AA batteries (not included) |
| Display Backlight | Yes |
| Humidity Range | 10% to 99% |
| Rainfall Range | 0 to 393.7 inches (0 to 9999 mm) |
| Wind Speed Range | 0 to 180 kph |
| Wind Direction | 0 to 360 degrees |
| Power (Base Station) | 3 x AA batteries (not included) |
| Power Source | Batteries |
| Memory | No |
| Connectivity | No |
Explains how alarms are indicated visually and audibly, and how to silence them temporarily or permanently.
Details how to enter alarm mode to view current alarm settings and associated clock times.
Guides users on configuring specific alarm parameters like hour, minute, and thresholds for various measurements.
Explains how to toggle the audible beep for both alarms and key presses on the console.
Explains the 'Feels Like' temperature, which combines Heat Index and Wind Chill calculations based on conditions.
Illustrates the different moon phases displayed by the console based on the calendar date.
Details how to customize background color ranges to suit personal preferences or local temperature definitions.
Describes the low battery indicator icon for sensors and provides advice on battery replacement.
Lists wireless transmission range, frequency, and update rates for sensors and console communication.
Provides range, accuracy, and resolution for all measured weather parameters like temperature and wind speed.
Outlines the power requirements for the base station and sensors, including battery types and life.
Lists all components included in the WS-12 weather station package with corresponding images for identification.
Lists essential tools recommended for the assembly and installation of the weather station.
Details the assembly and setup procedure for the anemometer sensor, including battery installation.
Guides users through the assembly and setup process for the rain gauge sensor, including battery compartment access.
Explains how to set up the thermo-hygrometer sensor, including accessing the battery compartment and dip switches.
Covers the operation and setup of the main display console.
Illustrates and explains the different sections and indicators on the display console screen.
Provides step-by-step instructions for powering up and configuring the display console after initial setup.
Details how to verify the proper functioning of installed sensors before final placement.
Recommends operating the weather station temporarily to check functions and wireless range before permanent installation.
Guides users on factors to consider when choosing an optimal installation location for the weather station.
Offers essential tips to ensure reliable wireless communication between sensors and the console.
Details the process of mounting and orienting the anemometer sensor, including initial wind direction calibration.
Explains how to securely mount the rain gauge sensor onto a pole or horizontal surface.
Provides instructions for mounting the thermo-hygrometer sensor in an appropriate shaded outdoor location.
Describes how to quickly access and view specific data points like time, rainfall, pressure, or graph records.
Guides users through setting time, date, units of measure, and backlight color preferences.
Details the procedure to reset the console to its original factory default settings.
Explains how to switch the display between different remote sensors (1 through 8) or enable scroll mode.
Describes how to reacquire lost signals from remote sensors by initiating a search.
Explains how to view historical data graphs for various measured parameters like wind speed and temperature.
Guides on clearing the recorded minimum and maximum weather data for all sensors.
Explains how to temporarily silence an active alarm by pressing the snooze button.
Details how to turn the console backlight on/off and adjust its brightness level.
Explains how to calibrate sensors to fine-tune measurements against a known reference source.
Provides step-by-step instructions for calibrating the temperature readings of the sensors.
Details the process for calibrating humidity readings using an accurate source like a sling psychrometer.
Guides calibration for wind speed, rainfall, and barometric pressure measurements against a known source.
