American Dynamics AD2088 - Preset Title Configuration; User and Keyboard Settings Management

MEGAPOWER 168 / AD2088 OPERATION AND PROGRAMMING REFERENCE GUIDE (8200-0170-01, REV. A)
28 of 30
Changing Preset Titles
When Preset Titles is selected from the Cameras
menu, the following menu displays.
CAMERA - 0001
PRESET - 01
TITLE -
PREVIOUS MENU
AMERICAN
DYNAMICS
ABCDEFGHIJKLMN
OPQRSTUVWXYZab
cdefghijklmnop
qrstuvwxyz012
3456789<>:-,/;
Use this menu to program 2-line, 16-character titles
for use with camera preset scenes. The Preset
Titles are displayed in place of the Camera Title in
the on-screen display when the associated preset
number is called to that camera.
Note: A maximum of 4096 Preset Titles can be
programmed for the system.
To program preset titles:
1. Move the cursor to the CAMERA number line.
2. Use the numeric keypad to enter the camera
number (real or pseudo), and press the Enter
(Preset) key. The cursor will move to the Preset
field.
3. Use the numeric keypad to enter the preset
number (1-72) and press the Enter (Preset) key.
The cursor moves to the Preset Title field.
4. Change the Preset Title:
a. Move the cursor to the TITLE lines. Two
cursors display: the Title Cursor and the
Selection Cursor.
b. Press the Next key to move the Title Cursor
until the correct character in the title is
highlighted.
Note: You must start from the first character
in the title and move through the text until the
desired character position is selected. You
cannot backspace through the title.
c. Position the Selection Cursor by using the
arrow keys or joystick to highlight the letter,
number, or symbol to include in the title.
Press the ENTER (Preset) key to add the
selected character to the title.
d. Repeat steps 4b-4c to complete the title.
5. When finished making changes, press Exit
(Patrn) to return to the previous menu.
Configuring User or Keyboard
Settings
The Users/Keyboards menu is used to set priority
levels for keyboards or users, to set user numbers
and passcodes, and to configure each of the eight
priority levels.
Note: If USER IDs are enabled in the System
Options menu, the first entry in the USERS /
KEYBOARDS menu reads USER.
USERS / KEYBOARDS
1. USER
2. PRIORITY
RETURN MAIN
If USER IDs are disabled in the System Options
menu, the first entry in the menu reads
KEYBOARD.
USERS / KEYBOARDS
1. KEYBOARD
2. PRIORITY
RETURN MAIN
To select an entry from the USERS/KEYBOARDS
menu:
1. Move the cursor to the desired line, or enter the
number (1-2) for the desired selection.
2. Press the Enter (Preset) key to access the
associated menu.