PN 305725901, Rev YF
Safety Notes
WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical
instructions as follows:
Important information that should not be overlooked.
An operating procedure which, if not strictly observed, may result in personal
injury or environmental contamination.
An operating procedure which, if not strictly observed, may result in damage
to the equipment.
Burn hazard. Hot surface. Do not touch, allow to cool before servicing.
Read this manual before beginning the installation and operation of the
3050-DO Analyzer. Failure to do so, and or use of the equipment in a manner
not specied in this manual or accompanying documents, may impair the
protection against re, electrical shock and injury originally provided by this
equipment. In addition, failure to follow the installation and start-up instruc-
tions may void the instrument warranty.
Electrical Safety
Up to 240 kV may be present in the analyzer housings. Always shut down power
source(s) before performing maintenance or troubleshooting. Only a qualied
electrician should make electrical connections and ground checks.
Any use of the equipment in a manner not specied by the manufacturer may
impair the safety protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specications and safety protection
are void if instrument is operated from an improperly grounded power source.
Verify ground continuity of all equipment before applying power.
vi | 3050-DO Moisture Analyzer
To Next Page
Loading...
Need help?
General
