4-56 | Model 931S / Model 932S UV Analyzers
3 = span1
Manually forces the analyzer to continuously backpurge its sample
system with Span Gas1.
4 = span2
Manually forces the analyzer to continuously backpurge its sample
system with Span Gas2.
5 = stream A
Manually forces the analyzer to switch to sampling from Stream A.
6 = stream B
Manually forces the analyzer to switch to sampling from Stream B.
7 = sample
Manually forces the analyzer to continuously sample.
Apply button Applies the changes made to the Flow
Control mode.
To Next Page
Loading...
