Ametek Reichert Phoroptor VRx - Auxiliary Lenses or Filters

Instrument Setup (continued)
Icon Description (continued)
Auxiliary Lenses or Filters
1. Touch RED/GREEN/POLARIZED Lens Filters, located on the right side of the screen, just
below the illumination adjustment icons, to access the auxiliary lenses and lters. (Please refer
to Figure IS-22, #10.)
Note:
The lenses and lters appear in the selection bar at the bottom of the screen.
Note: The circles adjacent to the R and L above the Active Data Field indicate which lters are
in place in the Phoroptor Head apertures.
Note: The following is an example of the R/L indication on the Controller monitor for the Red/
Green lter with the red lter in the right eye and the green lter in the left eye:
2. Press the Lens Filters, located at the bottom of the screen, to apply the desired lters to the
lens apertures. (Please refer to Figure IS-23.)
Figure IS-23, Auxiliary Lenses Screen
30 16241-101 Rev. D