Instructions for Use (continued)
Data Input (continued)
Entering Data Manually
Perform the following steps to enter data manually: (Please refer to Figure IU-09.)
1. Touch the drop-down list in the main display area to open a drop-down list of different data sets.
2. Select the type of data to enter. To enter auto refractor data, touch the AR option in the drop-
down list or press the AR button. To enter lensmeter data, touch the LM option in the drop-down
list or press the LM button.
3. The data set is unlocked if it has not been used. If the data set has been used and you want to
change it, touch UNLOCK at the top left of the title bar to open it. (Please refer to Figure IU-10.)
Figure IU-09, Data Input Drop-Down List
Figure IU-10, Data Input Drop-Down List
Unlock
Icon
Drop-Down
List
56 16241-101 Rev. D
To Next Page
Loading...