Service Menu (continued)
Set Date/Time
1. Touch + or - in the Set Date/Time box to change the date and time. (Please refer to Figure IS-
33.)
2. Touch SET to set the date and time.
Phoroptor Test
Figure IS-34, Phoroptor Test Screen
1. Touch PHOROPTOR TEST to run a Phoroptor Head operation check. (Please refer to Figure
IS-34.)
2. Touch:
• START to begin the test.
• STOP to pause the test.
• EXIT to end the test.
Instrument Setup (continued)
49
16241-101 Rev. D
To Next Page
Loading...