Instrument Setup (continued)
Programs (continued)
Selecting Charts for Program Steps
The Sphere Adjust, Cyl Adjust, and Axis Adjust steps allow you to associate a specific chart with that
step. (Please refer to Figure IS-26.)
1. Touch the Chart icon located below the Eye section on the screen.
2. Touch the chart you want to use for that step.
Note: The charts selected in the Charts menu for the Prism, Phoria, Vergence, XCyl, and BB
tests are used for those tests.
Figure IS-26, Sphere Adjustment Chart Selection
40 16241-101 Rev. D
To Next Page
Loading...