Options/Setup Menu (continued)
Settings
1. Open the OPTIONS/SETUP MENU to display the Settings screen.
2. Touch the box for each setting to customize settings. (Please refer to Figure IS-24.)
3. Touch the preferred option in the drop-down list to select it.
Note: The Options categories are described in the following pages.
Figure IS-24, Settings Menu
Language
Use this option to change the language of the operating system.
Refraction Sequence
Select the preferred refraction step sequence: SCA (sphere, cylinder, axis), SAC (sphere, axis,
cylinder), SCAS (sphere, cylinder, axis, sphere), SACS (sphere, axis, cylinder, sphere). Pressing
the CONTROL KNOB advances through the selected sequence of refraction steps after each step is
completed.
Aperture Default
This option sets the open lens apertures for a new exam. The options are:
• Both Open
• Right Open
• Left Open
Instrument Setup (continued)
33
16241-101 Rev. D
To Next Page
Loading...
Need help?
General