Instrument Setup (continued)
Service Menu (continued)
Keyboard Test (continued)
Sound Control Test
The Sound Control section of the Keyboard Test window allows you to test the functioning of the sounds
emitted by the Controller when performing various functions.
The following list explains the sounds:
• Beep - Indicates an error message or that certain keys are not active when performing certain
operations in the Phoroptor VRx.
• Chirp - Indicates that a test or function completed successfully.
• Click - Is a response to pressing buttons or pressing and turning the Control Knob.
Test Mode Section
The Test Mode section verifies the function of the Control Knob.
1. Touch START TEST.
2. Turn the CONTROL KNOB to the right and left one click stop to test the knob.
Firmware Version Section
1. Touch GET VERSION to view the rmware version of the instrument.
LED Control Section
The LED Control section allows you to test all of the LED lights that back light the Keypad buttons.
• All On - Illuminates all of the keys at once.
• Cycle - Illuminates the keys one at a time.
• Brightness - Adjusts the illumination of the LEDs in the Keypad.
Touch the EXIT screen icon to close the Keyboard Test screen.
Import Settings and Export Settings
Import Settings
Import Settings allows the user to import settings from another VRx into the device from a USB drive.
Export Settings
Export Settings allows the user to export the current settings from one VRx to another VRx using a USB
drive.
Factory Settings
Factory Settings allow the user to restore setting to the factory default.
51
16241-101 Rev. D
To Next Page
Loading...