Instructions for Use (continued)
Clearing Data (continued)
Initiate the action to clear data by pressing the C button or touching CLEAR on the menu bar at the
bottom of the screen. Then touch the data you want to delete as described below.
Clearing Individual Data Groups
1. Touch Subj, Final, AR, LM, REF, Mem 1, or Mem 2, located on the menu bar at the bottom of
the screen, or press a grey Keypad button, to indicate the data set you want to clear.
Clearing Data for One Eye
1. Press the R or L button, or touch R or L next to the lens apertures.
Clearing Active Refraction Data
1. Press the B button.
Note: This clears all the data for both eyes in all rows of the active refraction box.
Clearing Lensmeter and Auto Refractor Data
1. Press the LM or AR button on the top right of the Keypad.
Clearing Individual Refraction Data
1. Touch the box on the screen for the individual data eld you want to delete (e.g., Touch the
RIGHT EYE, SPHERE data eld).
99
16241-101 Rev. D
To Next Page
Loading...
Need help?
General