The Purpose of Ai205
Powerful Intelligent Power Meter
Ai205 Series Intelligent power meter was designed by used of latest
microprocessor and digital signal process technology. Electric power parameters,
energy and demands metering, power quality monitoring, remote control, over
range alarming, statistics and records, all these functions are only in one pocket-
size unit. There are also alarm on over/under Voltage, Current,Power, Power
Factor, Frequency, Unbalance Factors or Demands and Pulse Output based on
Energy or Reactive Energy in Ai205. Switch status monitoring is possible by
using the 4 digit inputs. It combines high accuracy measurement with intelligent
multifunction and simple HMI interface.
Idea Choice for Electric Automation SCADA System
Ai205 can be used to replace all traditional electric meters. It also can be
used as Remote Terminal Unit (RTU) for monitoring and controlling in a SCADA
system. All the measured data is available via digital RS485 communication ports
running the Mobus
TM
protocol.
Energy Management
Ai205 can measure double directions four quadrants Kwh and Kvarh with
accuracy up to 0.5%. It can provide high standard energy data and energy demand
data. All these data is important for statistics of each line feeder and total.
Remote Power Control
The main function of Ai205 is measurement, but it has also got some flexible
I/O functions. This made the meter can be used as distributed RTU (metering,
monitoring, remote controlling in one unit).
2
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
To Next Page
Loading...