Need help?Do you have a question about the AMPTRON Ai205 and is the answer not in the manual?
Explains the core functions and benefits of the Ai205 meter.
Details the various industries and systems where Ai205 can be deployed.
Highlights the key features, accuracy, and ease of use of the Ai205 meter.
Compares the standard and advanced Ai205 models and their I/O options.
Provides a detailed view and physical measurements of the Ai205 meter.
Covers environmental requirements, temperature, humidity, and installation steps.
Details terminal strips and wiring for voltage, current, auxiliary, and extend connections.
Explains wiring for digital inputs, relay outputs, and digital outputs.
Explains the meter's display segments, labels, and the function of each key.
Guides users on how to navigate and read voltage, current, power, and energy data.
Describes how to access and view maximum and minimum values of measured parameters.
Details the process for setting parameters like address, baud rate, and input wiring modes.
Defines key electrical parameters measured by the Ai205 meter and their significance.
Explains the Modbus RTU protocol used for communication and its transmission mode.
Details the data frame format, including address, function, data, and CRC fields.
Lists parameters, their addresses, ranges, object types, and access methods for data retrieval.
Provides detailed input ratings, accuracy, resolution, standards, and dimensions of the Ai205.
Explains the coding system for ordering Ai205 meters with various voltage, current, and option configurations.
General| Brand | AMPTRON |
|---|---|
| Model | Ai205 |
| Category | Multimeter |
| Language | English |
To Next Page