NetLinx Security with a Terminal Connection
135
NI-3101-SIG Signature Series NetLinx Integrated Controller
Logout
The logout command will log the user out of the current secure telnet session. For a Terminal session, the
user will be logged out and to access Terminal commands again the user will first have to login.
Help Security
The help security command will display the security menu as shown previously.
Setup Security
The security command displays a series of menus that allow the security administrator to create and edit
users, create and edit groups, and setup directory associations for the Web Server.
A user must be given rights to access this command. Any user that does not have rights to Security
Configuration will see the following message when trying to access the setup security command:
>setup security
You are not authorized to access security commands
If a user is authorized, or if Configuration Security is not enabled, the Main Security Menu will be
displayed.
It is very important for a user properly execute the 'logout' command prior to
disconnecting from a Master. Simply removing the USB connector from the
Configuration Port maintains your logged-in status until you either return to
logout via a new session or reboot the target Master.
To Next Page
Loading...
Need help?
General
