Onboard WebConsole User Interface
33
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Device Network Settings Pages
Click on the blue Information (i) icon next to any device listed in the Device Tree to access the Network Settings page for the
selected device (FIG. 36).
Use the options on this page to view/edit the device’s network settings.
Refer to the Manage Devices - Network Settings section on page 69 for details.
ZeroConf ig Networking
Use these radio buttons to enable/disable the new Zero-Configuration (zeroconf) client in the Master.
By default, zeroconf is enabled (On option selected). With zeroconf enabled, the Master's web interface will be registered via
zeroconf and can be viewed through a zeroconf browser plug-in such as Bonjour for IE.
FIG. 36
Example Network Settings page
To Next Page
Loading...
