AMX NI-700

WebConsole - System Options
70
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
IP Device Discovery
Use these radio buttons to enable/disable the detection of third party multicast IP based Device Discovery beacons. By default, IP
Device Discovery is enabled (On option selected). With IP Device Discovery enabled, the Master will detect third party multicast IP
based Device Discovery beacons.
Manage Devices - URL List
With the Master selected in the Device drop-down menu, click the URL List link (in the Manage Devices tab) to access the URL List
page (FIG. 76). The options on this page allow you to view and edit the URL List of devices for the Master.
Adding a URL To The Master’s List Of Devices
In the Manage Devices - URL List page, click the Add URL button to open the Add a URL page (FIG. 77):
Fill in the fields and click Accept to save the changes and add this information to the URL List.
FIG. 76
System - Manage Devices (URL List)
FIG. 77 Add a URL page