WebConsole - System Options
59
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Adding A New License
1. Click the Add New License button to access the Add a License page (FIG. 63).
2. Enter the Product ID (certificate number) provided with the product into the Product ID fields. Contact the AMX Sales
department with both the product serial number (or certificate number) and the serial number of target Master to register
your product and in turn receive the necessary Key information (typically 32 to 36 digits in length) which is then entered into
the Key fields on this page.
3. Enter the Product Key into the Key fields. The Product Key is Master-specific and is typically provided by AMX upon
registration.
Example: AMX Meeting Manager and i!-Voting applications are examples of products that require both a Product serial number
and a Master-specific key prior to usage.
4. Press the Accept button to save the information. If there are no errors with the information on this page, a āKey successfully
added for Product ID XXXXā is displayed at the top of the page.
Removing a License
1. Click the Remove (x) icon to the left of the license that you want to remove.
2. The system will prompt you to verify this action before the license is removed from the Master. Click OK to proceed.
3. Press the Accept button to save the information.
FIG. 63
Manage License - Add a License page
To Next Page
Loading...
