WebConsole - System Options
69
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Manage Devices - Network Settings
With the Master selected in the Device drop-down menu, click the Network Settings link (in the Manage Devices tab) to access the
Network Settings page (FIG. 75). Use the options on this page to view/edit the Master’s network settings.
ZeroConf ig Networking
Use these radio buttons to enable/disable the Zero-Configuration (ZeroConfig) client in the Master. By default, ZeroConfig
Networking is enabled (On option selected). With ZeroConfig enabled, the Master's web interface will be registered via ZeroConfig
and can be viewed through a ZeroConfig browser plug-in such as Bonjour for IE.
NDP Beacon
Use these radio buttons to enable/disable the NetLinx Discovery Protocol (NDP) beacons client in the Master. By default, NDP
Beacon is enabled (On option selected). With NDP Beacon enabled, the Master will transmit NDP beacons for AMX's proprietary
device discovery.
FIG. 75
System - Manage Devices (Network Settings)
To Next Page
Loading...
