WebConsole - System Options
68
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Editing Polled Port Settings
Click the Edit button for a port in the Physical Port list to access the Edit Port Settings page (FIG. 74):
Use the drop-down menus to modify the Port settings. Click Reset to Default Settings to return this port to its default
configuration:
FIG. 74
Manage Polled Ports - Edit Port Settings
Default Port Settings
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control None
485: Disabled
To Next Page
Loading...
