Firmware Pages and Descriptions
73
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
Time & Date Setup Page
The options on the Time & Date Setup page (FIG. 65) allow you to set and adjust time and date
information on the NetLinx Master. If the time and/or date on the Master is modified, all connected
devices will be updated to reflect the new information.
Features on this page include:
FIG. 65 Time and Date Setup page
Touch panels do not have an on-board clock; the only way to modify a panel’s time
without altering the Master is via NetLinx Code.
Time & Date Setup Page
Back: Saves all changes and returns to the previous page.
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual
indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Time Date Refresh/Set: This section provides two options:
• The Get Time/Date button retrieves Time and Date information from the Master.
• The Set Time/Date button sets the Master to retain and save any time/date
modifications made on the panel.
Time Display fields: • These fields display the time in three formats: STANDARD, STANDARD AM/PM,
and 24 HOUR.
Date Display fields: • These fields display the calendar date information in several different formats.
To Next Page
Loading...
