EasyManua.ls Logo

AMX NXT-CV10 - User Manual

AMX NXT-CV10
208 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation/Reference Guide
Touch Panels
NXT/D-CV10
10" Modero
®
Touch Panel
Last Revised: 7/2/2012

Table of Contents

Other manuals for AMX NXT-CV10

Preview: Dimension Guide
Dimension Guide1 page

Questions and Answers

  • R
    Ralph BowmanJul 31, 2025
    How to fix AMX NXT-CV10 Touch Panel USB driver with a yellow exclamation point?
    • A
      Alison DudleyJul 31, 2025
      If your AMX Touch Panel USB driver shows a yellow exclamation point, it indicates an incorrect installation. Reinstall the driver by following these steps: * Power up the panel without the USB cable connected. * Plug in the USB cable into the panel; a USB icon should appear in the System Tray. * Double-click the icon to see the "AMX USB LAN LINK" device. * If the "Install Driver" dialog doesn't appear automatically, select the "Properties" button and then the "Update Driver" button. * Click Next on the Install Driver dialog to accept the default prompts. * Agree to continue the installation even if the OS notifies you about the missing digital signature. * After installation, the exclamation point should disappear.
  • B
    Brandon MartinezAug 14, 2025
    What to do if a VNC Server dialog appears when using G4 WebControl with an AMX NXT-CV10 Touch Panel?
    • M
      Mrs. Wendy Benton MDAug 15, 2025
      When connecting to a target AMX Touch Panel via WebControl, you should see a G4 Authentication dialog asking for the panel's password. If a VNC Server dialog appears instead, it requires the target panel's IP address. You can find this IP Address on the Setup > Protected Setup > System Settings page, within the IP Settings section. Enter the IP Address and click OK. You will then be prompted with the G4 Authentication popup where you must enter the panel’s WebControl password.

Summary

NXT;D-CV10 10 Modero Touch Panel Operation Guide

NXT;D-CV10 10 Modero Touch Panel

Specific model and its primary function as a touch panel.

Touch Panels Overview

Overview of the product line and its purpose.

Introduction to Modero Touch Panels

Features

Lists key technical specifications and capabilities of the touch panels.

NXA-AVB;ETHERNET Breakout Box

Panel Installation Procedures

Installation Overview

Installing the Internal Components

Installing the NXD into Drywall using Expansion Clips

Wiring Guidelines for the CV10 Panels

Panel Calibration Process

Overview

Calibrating the Modero Panel

Step-by-step guide for performing panel calibration.

Configuring Panel Communication

Overview

Introduces communication methods (USB, Ethernet, Wireless) for the panel.

Modero Setup and System Connection

Steps to set up the panel and connect it to a system.

Configuring and Using USB with a Virtual Master

Detailed guide on setting up USB communication with a virtual master.

Wireless Settings Page - Wireless Access Overview

Configuring a Wired Ethernet Connection

Steps to configure wired Ethernet communication.

Upgrading Modero Firmware

Upgrading Modero Firmware via USB

Step-by-step guide for upgrading firmware using a USB connection.

Upgrading Modero Firmware via Ethernet (IP Address)

Guide for upgrading firmware using an Ethernet (IP Address) connection.

Firmware Pages and Descriptions

Setup Page Elements

Details the elements and functions of the main setup page.

Protected Setup Page

Troubleshooting Common Issues

Troubleshooting Overview

Troubleshooting Information

Provides specific solutions for common troubleshooting symptoms.

Troubleshooting Information (Continued)

Solutions for panel recognition and NetLinx Studio connection issues.

Appendix B - Wireless Technology

Overview of Wireless Technology

Explains WLAN standards like 802.11b/g, IP routing, and wireless access points.

EAP Authentication

EAP Communication Overview

Configuring G4 Touch Panel for USB Communication

Programming Commands

Programming Overview

Introduces programming the touch panel using Send_Commands and variable text.

Button Assignments

Page Commands

Lists commands for managing popup pages and their behavior.

Button Commands

Button Query Commands

Panel Runtime Operation Commands

Panel Setup Commands

Dynamic Image Commands

AMX NXT-CV10 Specifications

General IconGeneral
Dimensions (WxDxH)283 x 84 x 202 mm
Ethernet LAN (RJ-45) ports1
Pixel pitch0.28 x 0.28 mm
Aspect ratio16:9
Screen shapeFlat
Display diagonal10 \
Display brightness350 cd/m²
Display resolution800 x 480 pixels
Contrast ratio (typical)350:1
USB Type-A downstream ports quantity2
CertificationFCC 15 B, CE, EN60950
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 85 %
Operating relative humidity (H-H)20 - 85 %
NVIDIA G-SYNCNo
Weight and Dimensions IconWeight and Dimensions
Weight (without stand)1200 g

Related product manuals