EasyManuals Logo
Home>AMX>Touch Panel>NXT-CV10

AMX NXT-CV10 User Manual

AMX NXT-CV10
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
Firmware Pages and Descriptions
94
10" Modero Touch Panels
Supported sampling rates for WAV
The following is a listing of supported sampling rates associated for WAV files played on CV10 panels. Some
WAV files currently played on Modero's may not work on these panels. The supported sampling rates for WAV
files are:
Protected Setup Page
This button opens the Protected Setup page which centers around the properties used by the panel to properly
communicate with the NetLinx Master. Refer to both the Protected Setup Navigation Buttons section on
page 97 and the Protected Setup Page section on page 94 for more detailed information.
Volume Page Elements (Cont.)
Default Panel Sounds: Sets the Modero panel to play various sounds.
Activating the Button Hit button plays a default sound when you touch an
active button.
Activating the Button Miss button plays a default sound when you touch a
non-active button or any area outside of the active button
The Play Test Sound button plays a test WAV/MP3 file over the panel’s
internal speakers.
Internal Sound Level: This section allows you to adjust the current sound level on the internal panel
speaker:
Use the UP/DN buttons to adjust the volume output on the internal speakers
(range = 0 - 100).
The Internal Sound Level bargraph indicates the current sound level.
The Mute button mutes the volume.
Analog/Breakout Box:
Line In Level: Allows you to adjust the current Line-In volume level (being received from the
communicating breakout box).
Use the UP/DN buttons to adjust the Line-In volume level (range = 0 - 100).
The Line-In Level bargraph indicates the current Line-In level.
The Mute button mutes the Line-In volume.
Mic Out Level: Allows you to adjust the current Microphone volume level (being received from
the communicating breakout box).
Use the UP/DN buttons to adjust the Microphone volume level
(range = 0 - 100).
The Mic Out Level bargraph indicates the current Mic Out level.
Supported WAV Sampling Rates
48000 Hz 16000 Hz
44100 Hz 12000 Hz
32000 Hz 11025 Hz
24000 Hz 8000 Hz
22050 Hz

Table of Contents

Other manuals for AMX NXT-CV10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AMX NXT-CV10 and is the answer not in the manual?

AMX NXT-CV10 Specifications

General IconGeneral
Dimensions (WxDxH)283 x 84 x 202 mm
Ethernet LAN (RJ-45) ports1
Pixel pitch0.28 x 0.28 mm
Aspect ratio16:9
Screen shapeFlat
Display diagonal10 \
Display brightness350 cd/m²
Display resolution800 x 480 pixels
Contrast ratio (typical)350:1
USB Type-A downstream ports quantity2
CertificationFCC 15 B, CE, EN60950
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 85 %
Operating relative humidity (H-H)20 - 85 %
NVIDIA G-SYNCNo
Weight and Dimensions IconWeight and Dimensions
Weight (without stand)1200 g

Related product manuals