AMX NXD-1000Vi - Ekp; Pkeyp; Pkp; Setup

Programming
173
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
Panel Runtime Operation Commands (Cont.)
@EKP Extend the Keypad.
• Pops up the keypad icon and initializes the text string to that specified.
• The Prompt Text is optional.
Syntax:
"'@EKP-<initial text>;<prompt text>'"
Variables:
initial text = 1 - 50 ASCII characters.
prompt text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'@EKP-33333333;Enter Password'"
Pops up the Keypad and initializes the text string '33333333' with prompt text 'Enter
Password'.
PKEYP Present a private keypad.
• Pops up the keypad icon and initializes the text string to that specified.
• Keypad displays a '*' instead of the numbers typed.
• The Prompt Text is optional.
Syntax:
"'PKEYP-<initial text>'"
Variables:
initial text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'PKEYP-123456789'"
Pops up the Keypad and initializes the text string '123456789' in '*'.
@PKP Present a private keypad.
• Pops up the keypad icon and initializes the text string to that specified.
• Keypad displays a '*' instead of the numbers typed.
• The Prompt Text is optional.
Syntax:
"'@PKP-<initial text>;<prompt text>'"
Variables:
initial text = 1 - 50 ASCII characters.
prompt text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'@PKP-1234567;ENTER PASSWORD'"
Pops up the Keypad and initializes the text string 'ENTER PASSWORD' in '*'.
SETUP Send panel to SETUP page.
Syntax:
"'SETUP'"
Example:
SEND COMMAND Panel,"'SETUP'"
Sends the panel to the Setup Page.
SHUTDOWN Shut down the batteries providing power to the panel.
This function saves the battery from discharging.
Syntax:
"'SHUTDOWN'"
Example:
SEND COMMAND Panel,"'SHUTDOWN'"
Shuts-down the batteries feeding power to the panel.