AMX NXD-1000Vi - Setting the Intercom Session Timeout; Setting Intercom Auto Answer; Advanced Setup

Full Duplex Intercom
126
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
Setting the Intercom Session Timeout
1.
Select the Setup button on your intercom page.
2. Press the up or down arrows to increment the timeout up by 1 second in each direction. If your call
exceeds your session timeout the panel provides you with a popup (FIG. 97) to extend the session.
3. Press Exit when you are finished.
Setting Intercom Auto Answer
1.
Select the Setup button on your intercom page.
2. Press the button beneath Auto-Answer to toggle the option. The button indicates its current state.
3. Press Exit when you are finished.
Advanced Setup
The intercom’s advanced setup pages are accessed through the intercom setup pages. The advanced pages
allow you to set the panel intercom to be monitored, to monitor other intercom panels, and to name the panel.
It is important to name the intercom panel; the name is displayed in other panels’ intercom call directory
pages.
FIG. 97 Extend Call Popup
FIG. 98 Intercom Advanced Setup Page