Andor Technology Zyla sCMOS 4.2 PLUS - Components and Connections; 1.4 Components; 1.4.1 Accessories

version 2.0 rev 18 Feb 2021
11
1.4 Components
The standard components supplied with the Zyla are shown in Table 1:
Table 1: Standard Components supplied with the Zyla
1.4.1 Accessories
There are a range of optional and additional accessories available for Zyla including:
• Mounting Adapters (C-mount, CS-mount or F-mount)
• Re-circulator and Compact Chiller Units (water cooled models must be water cooled via some method)
• Camera Link Cables (5 meter and 10 meter active including power supply)
• Fibre-opticExtenders(30and100meterbre-opticextendersolutions)
• Software Development Kit (SDK)
• Solis Image Capture and Analysis Software
Note: Longer lengths of USB 3.0 cable are available from other suppliers such as Stemmer/CEI.
PleaseseetheZylaspecicationsorcontactAndororyournearestAndorrepresentativeforfurtherinformation.
Description Quantity
Zyla 5.5 or Zyla 4.2 sCMOS Camera
with Integral Lens Mount Adaptor
(C, CS or F-mount: as selected at time of ordering)
1
Description Quantity
PCIe Frame Grabber
Card
1
Camera to PC
Interface cables (s)
USB 3.0 and 3-tap
10-tap
1 x 3 m
2 x 3 m
Power Supply Unit
(PS12)
andCountryspecic
Power Cord
1
Multi I/O Timing cable
1 x 3 m
Coolant hose inserts
(for water cooled
models only)
2
Description Quantity
Anti-static Strap
1
Allen Key
(1.5 mm)
1
Electronic copy of
Hardware Guide
1
QuickStart
Guide
1