Andor Technology Zyla sCMOS 4.2 PLUS - 3.5 Installing Software (Solis or SDK3); Selecting the Camera Type

version 2.0 rev 18 Feb 2021
59
3.5 Installing Software (Solis or SDK3)
NOTE: You must have administrator access on your PC to perform this installation.
The same instructions cover the installation procedure for Andor’s Solis software or Andor’s SDK, which is used
in conjunction with third party software. If you are planning to run your camera through a third party interface
you will require the Andor Drivers, called SDK3.
SwitchonthePC,insertCDandrunthe“setup.exe”leontheCDordownloadlocation.
• Conrmtheversionofsoftware.
• Follow the on screen prompts.
• Select the installation directory when prompted.
• When prompted for camera type select Zyla.
• Onthenalwindowclickon“Install”.Duringtheinstallationanumberofotherwindowswillappearas
various drivers are installed.
• Clickonthenishbuttonwhenprompted.
Figure 36: Selecting the Camera Type
For more information visit: https://andor.oxinst.com/support/