ES
FR
DE
GB
IT
C13961962IDM
English
-
22
-
Use and installation manual
E10
Electrical component compart-
ment has overheated
The oven solves the problem on
its own
The oven's functions are ena-
bled so cooking cycles can be
carried out
E11
E13
E14
Electronic circuit board diag-
nostics tripped
Inform the after-sales service
The oven's functions are disa-
bled so no cooking cycles can
be carried out
E20 Setup error Inform the after-sales service
The oven's functions are disa-
bled so no cooking cycles can
be carried out
E23
The washing cycle has been in-
terrupted during the final saniti-
zation stage
Press the reset button and rinse
the cooking chamber thorough-
ly by hand
If the problem persists, call the
after-sales service
E26
Automatic cleaning system fail-
ure
Check that no residues of clean-
ing products have been left in-
side the cooking chamber
If the problem persists, call the
after-sales service
The oven's functions are ena-
bled so cooking cycles can be
carried out
Alarm Fault Remedy Notes
To Next Page
Loading...
