Re lated
Com mands: GT0, GT1, GT2
*TST? Self Test
GPIB 488.2
Syn tax: *TST?
Re marks: Per forms a self test and re turns 'PASSED' or 'FAILED.'
NOTE: This com mand will re start the sweep in Power vs. Time mode.
Re lated
Com mands: STERR
ADDR Change GPIB ad dress
GPIB SETUP
Syn tax: ADDR <val>
val: 1 to 30
Re marks: Once the ad dress has been changed, the ML2400A Se ries will no lon ger
re spond to the old ad dress. The power me ter de fault ad dress is 13.
Query: ADDR?
Re turned
String: ADDR <val>
AVG Sets up averaging for a sensor.
SEN SOR
Syn tax: AVG <s>, [<mode>],[<val>]
s: A or B
mode: OFF
MOV Mov ing
RPT Re peat
AUTO Auto matic
val: AS CII string rep re sent ing an in te ger, 1 to 512.
Re marks: MOV ING av er age gives an up date to the me ter every sam ple/gate (nor -
mally 20 ms).
RE PEAT av er ag ing only re turns a read ing when the number of read ings
speci fied by <val> have been taken (1- 512).
AUTO MATIC av er ag ing uses a MOV ING type of av er age. The dis play
up dates at ap proxi mately 100 ms in ter vals, how ever the data is avail able
at the full rate. The dis play is slowed down to pre vent jit ter and al low
ML2400A OM 6-17
GPIB OPERATION ML24XXA NATIVE COMMANDS
To Next Page
Loading...
