fac tor ap plied when per form ing a 0 dBm cali bra tion. If the sen sor cali -
bra tion fac tor source is set to V/GHz or Fre quency, the sen sor in ter nal
EE PROM cor rec tion value at 50 MHz is used.
Ex am ples: CFADJ A, %, 99
Sets the cali bra tion fac tor to 99% for sen sor A.
CFADJ A, DB, 0.2
Sets the cal i bra tion fac tor to 0.2dB for sen sor A.
Query: CFADJ? <s>
Re turned
String: CFADJ <s>,<units>,<val>
CFCAL Cal fac tor man ual set ting
SEN SOR
Syn tax: CFCAL <s>, <units>, <val>
s: A or B
units: %, PCT, DB, or DBM
val: .07 to 150%
+31.55 to -1.76dB
Re marks: If the Cal fac tor source is set to man ual, this is the cali bra tion fac tor
number used.
Ex am ple: CFCAL A, %, 99
Sets the cal i bra tion fac tor to 99% for sen sor A.
CFCAL A, DB, 0.2
Sets the cal i bra tion fac tor to .2 dB for sen sor A.
Query: CFCAL? <s>
Re turned
String: CFCAL <s>,<units>,<val>
CFFRQ Cal Fac tor Fre quency value
SEN SOR
Syn tax: CFFRQ <s>, <value>[units]
s: A or B
value: 10 kHz to 122 GHz
Re marks: Sets the fre quency used to look up the cor rec tion data from the sen sor`s
in ter nal ta ble.
Ex am ples: Both of the fol low ing ex am ples set the frequency for cal source
frequency to 25 GHz for sensor A.
6-22 ML2400A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION
To Next Page
Loading...
