out put buffer is cleared once a valid GPIB data re quest com mand has
been re cog nised.
NOTE
If the buff er ing en abled is set to OFF and '*OPC?' is used,
the '*OPC?' will clear the out put buffer of any pre vi ous
re sponse data so only the '1' will ap pear.
CAL Cal sen sor to 0 dBm ref er ence
CALI BRA TION
Syn tax: CAL <s>
s: A or B
Re marks: Per forms a 0dBm cal i bra tion when the sen sor is at tached to the ref er -
ence 0 dBm source on the ML2400A Se ries (or an other 0 dBm ref er ence
source). If the cal i bra tion fails, the 'ex e cu tion er ror' bit in the Event Sta -
tus Reg is ter is set.
CDMEAS Chan nel CDMA Measurement
CHANNEL
Syn tax: CDMEAS <s>, <mode>
s: A or B
mode: AVG
PEAK
CREST
Re marks: Sets the CDMA mea sure ment mode. PEAK and CREST mea sure ments
are only avail able in CDMA read out mode when the CDMA av er age
value is greater than ap prox i mately –27 dBm.
Query: CDMEAS? <s>
Re turned
String: CDMEAS <s>,<mode>
CFADJ Cal Ad just
SEN SOR
Syn tax: CFADJ <s>, <units>, <val>
s: A or B
units: %, PCT, DB, or DBM
val: .07 to 150%
+31.55 to -1.76dB
Re marks: Sets a cali bra tion fac tor to be used when per form ing a 0 dBm cali bra tion
and the cali bra tion fac tor source is set to 'Ma nual.' This value is the only
ML2400A OM 6-21
GPIB OPERATION ML24XXA NATIVE COMMANDS
To Next Page
Loading...
