Anritsu ML2400A Series - Page 135

Query: GTARM?
Re turned
String: GTARM <state>
GTDLY Set pro file trig ger sam ple de lay
TRIG GER
Syn tax: GTDLY <val>[units]
val: 0.0 to 1.0 sec onds
Re marks: Sets the time de lay af ter the dis play trig ger de lay to when the sys tem
starts to take read ings and dis play ing them. This point is rep re sented by
the left most cur sor.
NOTE
Changing the left most cur sor or trig ger de lay time up -
dates ei ther the cur sor or the de lay time value.
Query: GTDLY?
Re turned
String: GTDLY <val>
GTGW Set pro file trig ger gate width
TRIG GER
Syn tax: GTGW <val>[units]
val: 100ns to 7.0 sec onds
Re marks: Sets the time the sys tem uses to per form what ever cal cu la tions are set
up. The time in ter val is rep re sented by the space be tween the left most
cur sor and the right most cur sor. Changing ei ther cur sor, or the Gate
width value, will up date both the cursors and the gate width value. The
de fault gate width value is 20 ms.
Query: GTGW?
Re turned
String: GTGW <val>
GTLVL Set pro file trig ger level
TRIG GER
Syn tax: GTLVL <val>
val: –30 to +20 dBm
6-48 ML2400A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION