Re marks: Trig gers a new se ries of read ings; enough to up date the in ter nal digi tal
fil ter for a noise free read ing at the cur rent power level. The value is
then re turned on the GPIB and re turns to TR0 standby mode.
Re lated
Com mands: TR0, TR1, TR3, *TRG, Group Exe cute Trig ger (GET), GT0, GT1, GT2
TR3 Trig ger free run
Syn tax: TR3
Re marks: Sets the ML2400A Se ries back into free run mode on both chan nels.
Re lated
Com mands: TR0, TR1, TR2, *TRG, Group Exe cute Trig ger (GET), GT0, GT1, GT2
ZE Zero sen sors
Syn tax: ZE
Re marks: Zero all con nected sen sors. The ML2400, when em u lat ing the HP 437,
may take lon ger to Zero a sen sor than the HP 437 it self. When per form -
ing a zero the sta tus byte should be used to iden tify when ZEROing is
com plete.
ML2400A OM 6-119
GPIB OPERATION HP 437B EMULATION COMMANDS
To Next Page
Loading...
