Safety Sym bols
To pre vent the risk of per sonal in jury or loss re lated to equip ment mal -
func tion, AN RITSU Com pany uses the fol low ing sym bols to in di cate
safety- related in for ma tion. For your own safety, please read this in for -
ma tion care fully BEF ORE op er at ing the equip ment.
Symbols used in manuals
DAN GER
In di cates a very dan ger ous pro ce dure that could re sult in se ri ous in jury
or death if not per formed prop erly.
WARN ING In di cates a haz ard ous pro ce dure that could re sult in se ri ous in jury or
death if not per formed prop erly.
CAU TION In di cates a haz ard ous pro ce dure or dan ger that could re sult in light- to-
severe in jury, or loss re lated to equip ment mal func tion, if proper pre -
cau tions are not taken.
Safety Symbols Used on Equipment and in Manuals
(Some or all of the fol low ing five sym bols may or may not be used on all AN RITSU equip ment. In ad di tion,
there may be other la bels at tached to prod ucts that are not shown in the dia grams in this man u al.)
The fol low ing safety sym bols are used in side or on the equip ment near
op era tion lo ca tions to pro vide in for ma tion about safety items and op -
era tion pre cau tions. En sure that you clearly un der stand the mean ings
of the sym bols and take the nec es sary pre cau tions BEF ORE op er at ing
the equip ment.
This sym bol in di cates a pro hib ited op era tion. The pro hib ited op era tion
is in di cated sym boli cally in or near the barred cir cle.
This sym bol in di cates a com pul sory safety pre cau tion. The re quired op -
era tion is in di cated sym boli cally in or near the cir cle.
This sym bol in di cates warn ing or cau tion. The con tents are in di cated
sym boli cally in or near the tri an gle.
This sym bol in di cates a note. The con tents are de scribed in the box.
These sym bols in di cate that the marked part should be re cy cled.
ML2400A OM SAFETY- 1
To Next Page
Loading...
Need help?
General
