SAFETY- 2 ML2400A OM
When sup ply ing AC power to this equip ment, con nect the ac ces sory 3-
pin power cord to a 3- pin grounded power out let. If a grounded 3- pin
out let is not avail able, use a con ver sion adapter and ground the green
wire, or con nect the frame ground on the rear panel of the equip ment to
ground. If power is sup plied with out ground ing the equip ment, there is
a risk of re ceiv ing a se vere or fa tal elec tric shock.
WARN ING
This equip ment can not be re paired by the op era tor. DO NOT at tempt to
re move the equip ment cov ers or to dis as sem ble in ter nal com po nents.
Only quali fied serv ice tech ni cians with a knowl edge of elec tri cal fire and
shock haz ards should serv ice this equip ment. There are high- voltage
parts in this equip ment pre sent ing a risk of se vere in jury or fa tal elec -
tric shock to un trained per son nel. In ad di tion, there is a risk of dam age
to pre ci sion com po nents.
WARN ING
Re pair
For Safety
WARN ING
Al ways ref er to the op era tion man ual when work ing near lo ca tions at
which the alert mark, shown on the left, is at tached. If the op era tion,
etc., is per formed with out heed ing the ad vice in the op era tion man ual,
there is a risk of per sonal in jury. In ad di tion, the equip ment per form -
ance may be re duced.
Moreo ver, this alert mark is some times used with other marks and de -
scrip tions in di cat ing other dan gers.
If this equip ment is used in a man ner not speci fied by the manu fac turer,
the pro tec tion pro vided by the equip ment may be im paired.
WARN ING
To Next Page
Loading...
Need help?
General
