Anrtisu Site Master S331D - Page 47

q
Back — Returns to the Main Markers Menu.
q
M2 through M4 — Selects the marker parameter and opens the marker second
level menu.
q
On/Off — Turns the selected marker on or off.
q
Edit — Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the previous
value.
q
Delta (Mx-M1) — Displays delta amplitude value as well as delta fre
-
quency for the selected marker with respect to the M1 marker.
q
Marker To Peak — Places the selected marker at the frequency with the
maximum amplitude value.
q
Marker Freq To Center — Makes the center frequency of the Site Master
equal to the frequency of the selected marker.
q
Back — Returns to the Main Markers Menu.
q
All Off — Turns all markers off.
q
More — Opens the continuation of the Marker Menus.
q
M5 — Selects the M5 marker parameter and opens the M5 second level
menu.
q
On/Off — Turns the selected marker on or off.
q
Edit — Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the pre-
vious value.
q
Marker Freq To Center — Makes the center frequency of the Site
Master equal to the frequency of the selected marker.
q
Peak Between M1 & M2 — Places the selected marker at the fre-
quency with the maximum amplitude value between marker M1 and
marker M2.
q
Valley Between M1 & M2 — Places the selected marker at the fre
-
quency with the minimum amplitude value between marker M1 and
marker M2.
q
Back — Returns to the Main Markers Menu.
q
M6 — Selects the M6 marker parameter and opens the M6 second level
menu.
q
On/Off — Turns the selected marker on or off.
q
Edit — Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the pre
-
vious value.
q
Marker Freq To Center — Makes the center frequency of the Site
Master equal to the frequency of the selected marker.
q
Peak Between M3 & M4 — Places the selected marker at the fre
-
quency with the maximum amplitude value between marker M3 and
marker M4.
q
Valley Between M3 & M4 — Places the selected marker at the fre
-
quency with the minimum amplitude value between marker M3 and
marker M4.
q
Back — Returns to the Main Markers Menu.
2-26
Chapter 2 Functions and Operations