Antec controls LUME20 - LUME ACCESSORIES; Differential Pressure Sensor (SDPT); Door Contact Switch (DCS)

LUME20 - MANUAL
7 | LUME20 – Manual | AntecControls.com
LUME ACCESSORIES
Differential Pressure Sensor (SDPT)
The SDPT is a room pressure sensor that is used to measure pressure.
Overview
See the SDPT product submittal on AntecControls.com for Specifications, Dimensions and Configurations.
Options
1. Differential Pressure Sensor
Model:
Features:
SDPT
• 2 – 10 VDC outputs for pressure reading.
• -0.25 to +0.25 in.w.c. (-60 to 60 Pa)
• LED light used to display status
• Accurate to 3% of reading
Door Contact Switch (DCS)
Door Contact Switches can be wired into the binary input(s) to detect when the door(s) are open.
Overview
See the DCS product submittal on AntecControls.com for Specifications, Dimensions and Configurations.
Options
1. Surface Mount 2. Flush Mount