Antec controls LUME20 - BACnet Polling Points; Adding a BACnet Polling Point

53 pages

To Next Page

To Previous Page

LUME20 - MANUAL

38 | LUME20 – Manual | AntecControls.com

BACnet Polling Points

This section details configuration instructions and available settings for BACnet Polling Points. Any analog BACnet point (Analog

Value, Analog Input, Analog Output) on the same MS/TP network as LUME20 can be polled by LUME20 for display on the

Home Screen.

Adding a BACnet Polling Point

To add a BACnet Polling Point, click the Add Point button in the BACnet Polling Points menu.

NOTE: A maximum of nine BACnet Polling Points can be configured per LUME20.