AnyTone AT-D868UV Programming Guide

AT-D868UV CodePlug Programming Guide
V-1.18
Page 5 of 25 © 2017 Trygve Svärd KD0PNQ
STEP 2 – DIGITAL CONTACT LIST
The Contact List is a “look-up” table for the radio to display all the details of the
contacted person instead of only the DMR ID number. Individual entries are not allowed.
A master list of DMR contacts is available at the DMR-MARK website:
http://www.dmr-marc.net/cgi-bin/trbo-database/datadump.cgi
This database of contacts can be directly used for DMR ID’s and imported into the radio
as required. Download the list and open it up as an excel spreadsheet. From the DMR
database, in the .csv spreadsheet, select the country, the DMR ID’s you want to copy
over to your radio as shown below (note: you may have to change the DMR database
from a .cgi file type to a .csv file type to be able to open it as an excel sheet).
The next step is to fill the radio with all possible contacts
you may ever encounter. By doing this, the radio will for
each contact you make display the name, DMR ID,
Callsign etc. of the individual you are connected with.
The DMR-MARK list is steadily growing and you may
have to pare it down to your needs.

AnyTone AT-D868UV Specifications

General

Brand	AnyTone
Model	AT-D868UV
Category	Two-Way Radio
Language	English