11
Quantum Owner's Manual
d. Nitrox indicator: If the FO
2
for mix 1 or mix 2 has been set to 22% or higher,
the Nitrox indicator will be displayed. See page 16 for more info on nitrox set-
tings.
CAUTION: If the Nitrox indicator is flashing, it means that the Quantum
has defaulted to 99% FO
2
. You must reset the FO
2
to match the con-
tents in your cylinder.
e. Altitude sector: If the Quantum detects that it is at altitude, it will display one
to three altitude sector icons. The Quantum automatically adjusts for altitudes
up to 19,680 ft. (6000 m). The following table lists the altitude sectors and their
corresponding altitude range.
WARNING: When diving at altitude, make sure the altitude sector
matches the actual elevation of the dive site, otherwise, the Quantum
may display inaccurate information.
Note: When arriving at a new altitude sector, segments on the nitrogen loading bar
graph may appear, even if you have not made a dive.
Sea Level
to 2624 ft
(800 m)
2624 ft
(800 m)
to 5248 ft
(1600 m)
5248 ft
(1600 m)
to 7872 ft
(2400 m)
7872 ft
(2400 m)
to 19680 ft
(6000 m)
Error. Icons ash
above 19680 ft
(6000 m)
Sector
Altitude Range
To Next Page
Loading...
Need help?
General
