35
Quantum Owner's Manual
i. Nitrox symbol: Only displayed if FO
2
is set to 22% or higher. Does not appear if
set to Air.
j. Water Type: Shows it the water type is set to fresh water or sea water.
Alternate Display
Pressing the B button shows the alternate
display (figure 15):
a. Maximum depth: The deepest depth
reached during the dive.
b. Temperature: The actual water tem-
perature at that time. Since the tem-
perature sensor is inside the computer,
it may take a few minutes before you
get an accurate reading.
c. FO
2
: The FO
2
setting for Mix 1 and
Mix 2.
Figure 15.
Dive Mode - Alternate Display
To Next Page
Loading...
