Apollo HD Series - 7.5 Alarm Management

115
115
Figure 7-56
7.5 Alarm
Click alarm function, you can see an interface is shown as in Figure 7-57.
Here you can set device alarm type and alarm sound setup.
Figure 7-57
Please refer to the following sheet for detailed information.
Type
Parameter
Function
Alarm
Type
Video loss
System alarms when video loss occurs.
Motion detection System alarms when motion detection alarm
occurs,
Disk full
System alarms when disk is full.
Disk error
System alarms when disk error occurs.
Camera
masking
System alarms when camera is viciously masking.
Encode alarm
System alarms when peripheral device alarms.
External alarm
Alarm input device sends out alarm.
Operation
Listen alarm
System notifies web when alarm occurs (you select
from the above event type), and then web can
notify user.
Video When alarm occurs, system auto enables video
monitor. This function only applies to video
detection alarm (motion detection, video loss and
camera masking).
Prompt
Automatically pops up alarm dialogue box.
Sound pop up System sends out alarm sound when alarm occurs.
You can specify as you wish.
Path
Here you can specify alarm sound file.