Figure 4-19
Figure 4-20
4.5.3 Video Loss
In Figure 4-16, select video loss from the type list. You can see the interface is shown as in
Figure 4-21.This function allows you to be informed when video loss phenomenon occurred.
You can enable alarm output channel and then enable show message function.
Tips:
You can enable preset activation operation when video loss occurs.
Please refer to chapter 4.5.2 motion detection for detail information.
Figure 4-21
4.5.4 Camera Masking
When someone viciously masks lens, the system can alert you to guarantee video continuity.
Camera masking interface is shown as in Figure 4-22.
To Next Page
Loading...
