Apollo HD Series User Manual

64
64
Figure 5-24
5.3.10 Default
Click default icon, system pops up a dialogue box. You can highlight to restore default factory
setup. See Figure 5-25.
 Select all
 General
 Encode
 Schedule
 RS232
 Network
 Alarm
 Detect
 Pan/tilt/zoom
 Display
 Channel name
Please highlight icon
to select the corresponding function.
After all the setups please click save button, system goes back to the previous menu.
Warning!
System menu color, language, time display mode, video format, IP address, user account will not
maintain previous setup after default operation!
Figure 5-25
5.4 Search
Please refer to chapter 4.3 Search.
5.5 Advanced
Double click advanced icon in the main window, the interface is shown as below. See Figure
5-26. There are total seven function keys: HDD management, alarm output, abnormity, manual
record, account, auto maintenance, and TV adjust.

Apollo HD Series Specifications

General

Category	DVR
Video Compression	H.264
Hard Drive Capacity	Up to 6TB
Remote Viewing	Yes
Operating System	Embedded Linux
Video Input	4/8/16 channels
Recording Resolution	1080p/720p
Mobile Support	iOS, Android