Apollo HD Series User Manual

49
49
Figure 4-38
4.9.4 Activate Patrol (tour)
In Figure 4-35, input patrol (tour) number in the No. blank and click patrol button
4.9.5 Pattern Setup
In Figure 4-35, click pattern button and then click “begin” button. The interface is shown as in
Figure 4-39. Then you can go to Figure 4-32 to modify zoom, focus, and iris.
Go back to Figure 4-39 and click “end” button. You can memorize all these operations as pattern
1.
Figure 4-39
4.9.6 Activate Pattern Function
In Figure 4-36, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In Figure 4-35, click border button. The interface is shown as in Figure 4-30.
Please go to Figure 4-32, use direction arrows to select camera left limit
Then please go to Figure 4-40 and click left limit button
Repeat the above procedures to set right limit.
Figure 4-40

Apollo HD Series Specifications

General

Category	DVR
Video Compression	H.264
Hard Drive Capacity	Up to 6TB
Remote Viewing	Yes
Operating System	Embedded Linux
Video Input	4/8/16 channels
Recording Resolution	1080p/720p
Mobile Support	iOS, Android