DRAFT
June 23, 2003 9:39 am, MFC_QSG_text.fm
38 Applied Biosystems Micro Fluidic Card Getting Started Guide
Once you have imported the setup file into an SDS document, the
SDS 2.1 software assigns the detectors for each assay to the
appropriate wells as indicated in the card map.
Figure 2 shows an SDS document after an SDS setup file has been
imported.
Figure 2 SDS document after importing an SDS setup file
SDS 2.1 software displays well
information if you leave the
cursor over the well
Setup tab
displays
information
about each
well. Selected
wells are
marked with
an X.
To Next Page
Loading...
Need help?
General
